call us (877) 431-2100

a Minnesota family-owned home and kitchen appliance store since 1954.

related information
local install charges
install prep guide
appliance hookup guide
shipping & delivery methods
shipping promotions
local delivery schedule
track your delivery

installation preparation tips

measure first
It’s very important that you measure the area where your appliance will be placed and be sure that your product will fit within the given dimensions. Check the entire pathway that the appliance will take to get to its final destination. Ensure that it will fit through each hallway and doorway of the entire path. Warners’ Stellian is unable to modify existing openings to accommodate your new appliances.

check your connections
Make sure to have an appropriate electric outlet within 3 1/2″ of the space you’ve selected for your new product. Check to see that the outlet is grounded (accepts a three-prong plug), since most appliances require one. For electric dryers, electric ranges be sure to check for the required 240V electric connection (also applies to some air-conditioners).

measure again
Take another look at the pathway en route to the final destination of your appliance and ensure that your product will fit through the designated space.

install services what’s included?

refrigerators:
We will install your new freestanding refrigerator into proper existing facilities. We will reconnect an existing water line to your new refrigerator for $39.98. Be sure to verify all measurements prior to purchase as we are unable to modify existing openings to accommodate your new appliance. Installation of any built-in refrigerator can be arranged at the time of purchase – additional charges will apply due to unique install requirements.

ranges:
We will re-install your new freestanding range into proper existing facilities. Due to in-home fuel safety codes, the purchase of a new electrical cord or gas flex is required for all range re-installations. For safety reasons, we require that a separate shutoff valve is present for all gas re-installations. Gas ranges are configured for natural gas fuel type, if a liquid propane (LP) conversion is needed speak with your sales associate regarding setup and additional charges.
We are unable to re-install gas ranges in the cities of Minneapolis, Richfield & Bloomington but we will assist you in arranging for installation with a preferred technician.

dishwashers:
We will install your new dishwasher into proper existing facilities. Proper electrical connections, existing inlet (with separate shutoff valve) and drain lines are required on site for all dishwasher installations. Be sure to verify all measurements prior to purchase as we are unable to modify existing countertops, flooring or cabinetry to accommodate your new dishwasher.

microwaves:
We will re-install your new over-the-range microwave into proper existing facilities. A 15 amp electrical power connection is required for installation. We can convert an existing hard wire connection to an electrical outlet for an additional fee, if needed. This service should be arranged with your sales associate prior to delivery.

washers:
We will re-install your new washer into proper existing facilities. Proper plumbing and electrical connections are required for installation. Be sure to verify all measurements as we are unable to modify existing openings or any existing connection fixtures to accommodate your new washer.

dryers:
We will re-install your new dryer into proper existing facilities. Due to in-home fuel safety codes, the purchase of a new electrical cord or gas flex is required for all dryer installations. The purchase of code-compliant venting materials is also required; Warners’ Stellian is unable to reconnect flexible, corrugated venting. (Installation parts charge is $29.95)

For safety reasons, a separate shutoff valve is required for all gas installations. Side venting is available for an additional $35.00 and should be arranged with your sales associate prior to delivery. Gas dryers are configured for natural gas fuel type. If you need a liquid propane (LP) conversion, speak with your sales associate regarding setup and additional charges.
We are unable to re-install gas ranges in the cities of Minneapolis, Richfield & Bloomington, but we will assist you in arranging for installation with a preferred technician.

air-Conditioners:
We will install your new air conditioner (size 12,000 BTU or less) into proper existing facilities. Wall unit installations require an existing sleeve capable of accommodating the new unit. Installation of window units will be completed on the first floor only. Be sure to verify all measurements prior to purchase as we are unable to modify existing openings to accommodate your new air conditioner.