|appliance resource center|
A new, Energy Star washer will save an average $135 in water and energy costs. But why stop there? These guidelines will help you save even more energy, water and money:
1. DON’T use too much detergent
You’re only helping Proctor & Gamble when you pour in those heaping cups of laundry soap. The owners’ manual provides instructions on the proper amount of soap to use. Using too much soap also can shorten the life your clothing, which could get expensive.
2. DO keep venting dry and clear
We recommend cleaning your dryer vent a few times a year (see Dryer not drying? Check the vent). Otherwise, it could get blocked up, causing your dryer to take longer to do its job. And remember to clean your lint filter after every use.
3. DO switch to cold-water washes
About 90 percent of the energy used for washing clothes in an average washer is for heating the water. Need I say more? If you have tough, oily stains, even switching your temperature setting from hot to warm can cut a load’s energy use in half. Otherwise, you’d be surprised how well cold water cycles clean these days.
4. DON’T over-dry your clothes
Instead, use a moisture sensor (if you have one) to automatically stop the dryer once it’s finished. Note: Dry towels and heavier cottons separate from lighter weight clothes to ensure proper drying when using a sensor. If you don’t have a moisture sensor, use the cool-down cycle to finish drying clothes using the residual heat.
5. DO put full loads in the washer and dryer.
Full loads of laundry mean fewer loads of laundry, which mean less energy, water and money used, too. If you must wash a small load, remember to set the water-level to match.